The Autocut Excel
Description
Fully Automatic, Multi Purpose, High Speed Slitting Machine, uniquely designed with 3 independent AC motors suitable for many products as listed below.
MODELS
AutoCut Excel 1350 | AutoCut Excel 2050
AutoCut Excel 1350 Specification
Web Width: 1350mm (53.15”) (also available in 2050mm (80.7”) web width)
Max Rewinding Dia: 1500mm (59”
Min Rewinding Dia: 1500mm (5.9”)
Max Unwinding Dia. 1600mm (63”)
Max Mechanical Speed 500m/min (1641ft/min) – depending on quality of
Material & general production conditions
Tension Range: 10 - 400 N
Slitting Width: 30 - 1300mm (1.18” – 51.18”)
Core Dia: 76mm, 152mm (3”, 6”)
Max. reel weight: 3000-4000kgs
Material: Paper, film, non-woven material, packaging laminates and other materials subject to testing 12 microns (0.0004”) to 350 microns (0.013”) 40gsm – 395gsm
Length count precision: +(-) 1-1000m
Unwind tension: 200Nm x 2
Rewinding power: 7.5kw per shaft
Processing power: 7.5kw
Side trim blow power: 3kw
Machine power: 39.5kw
Voltage 380V-415V +(-) 10%, 50/60Hz, 3 phase
Please specify the power you require
Weight 15500kg
Size: 8057 x 4340 x 2276mm (L x W x H)
Unwind tension control: Constant
Rewind tension control: Taper tension control system
Web guide: Precision +(-) 0.3mm (0.01”)
Movement +(0) 70mm (2.76”)
Rewinding
Dual rewinding with 2 reels, one above the other, including pneumatic lay-on pressure roller on both shafts
Unloading of finished reels automatically by unloading bottom reel first & top reel second, which brings the second reel to the unloading floor. Rewinding of finished rolls
Reel shaftless unwind
With shaft-less chucks on hydraulic lift, including 3” & 6” chucks
Automatic web guide with sensing of material edge
Automatic tension detection with hall switch sensor & pneumatic brake, including PLC with torque output
Unwind control, which is shown on control panel for speed, unwind tension, length and other parameters to allow the operator to consistently produce good quality product
Reel unwind splicing table
Infeed material control
Infeed drive
Tension roller
Material length counter
Slitting system
Slitting system with rotary knife slitting
20 Cutting blades included
Spare transmission guide roller
Trim extraction unit
Side Slit Trimming
Min Side Slit Trimming 5-10mm
Rewind unit
Rewinding with 3” airshaft and automatic tension control when reel diameter increases
Precision rewind drive, driven by servo motor
Lay-on rollers controlled by pneumatic air
Drive: Servo motor & servo drive
Operating system: Siemens PLC control
Operator functions: With HMI touch screen
Machine parts: Made from stainless steel, with 76mm (3”) gauge
Good quality bearings NSK, Japan or SKF, Sweden
Security by emergency stop & circuiting through PLC
